Coupling Types (Cpsettype) - Siemens SINUMERIK 840D Function Manual

Mc axes and spindles

Hide thumbs Also See for SINUMERIK 840D:

Table of Contents

Coupling commands

Storage location

Adaptive cycles are stored in the directory "CST".

User-specific adaptive cycles

If necessary (functional completion) the user can copy an adaptive cycle to the directory "CMA"

or "CUS" and apply changes there. When reading adaptive cycles, the sequence CUS → CMA

→ CST is observed and cycle variants are taken over on a first found basis, i.e. the adaptive

cycles copied into the directory CMA / CUS by the user are selected on a priority basis.

When upgrading the NC software, a log file is saved in the "CST" directory (Changelog),

indicating necessary changes of the adaptive cycles.

Coupling types (CPSETTYPE)

Coupling types

If presetting of coupling types (coupled motion, master value coupling, electronic gearbox and

synchronized spindle) is required, when creating the coupling module (CPON/CPLON or CPDEF/

CPLDEF), the keyword CPSETTYPE needs to be used also.

Axes and spindles

Function Manual, 06/2019, A5E47437747B AA

Adaptive cycle

M3: Coupled axes

14.5 Generic coupling

Sinumerik 840d sl