S3: Synchronous spindle
19.7 Data lists
19.7.3
System variables
System variable
$P_COUP_OFFS[following spindle]
$AA_COUP_OFFS[following spindle]
$VA_COUP_OFFS[following spindle]
For exhaustive explanations of the system variables, see:
Further information
List Manual System Variables
894
Description
Programmed offset of the synchronous spindle
Position offset for synchronous spindle (setpoint)
Position offset for synchronous spindle (actual value)
Axes and spindles
Function Manual, 06/2019, A5E47437747B AA