Activation/Deactivation - Siemens SINUMERIK 840D Function Manual

Figure 14-3
14.2.7

Activation/deactivation

Activation
The coupling of real axes to a curve table is activated through this command:
LEADON (<Following axis>, <Leading axis>, <n>)
with <n> =Number of the curve table
Activation is possible:
● In the part program
● in the definition of a synchronous action
Example:
...
N1000 LEADON(A,X,3)
...
Deactivation
The switch off of the coupling to a curve table takes place through the following command:
LEADON (<Following axis>, <Leading axis>)
Axes and spindles
Function Manual, 06/2019, A5E47437747B AA
Determining the minimum and maximum values of the table
; Axis A follows the master value X according to the rule
of motions defined in Curve Table No. 3
M3: Coupled axes
14.2 Curve tables
445