How To Program The User Prog Control - Furuno FSV-25S Operator's Manual

5.3.2

How to program the USER PROG control

1. Set the display appropriately.
When a combination mode is shown, press H/V/S key to select the display to pro-
gram.
2. Press the MENU/ESC key to show the main menu.
3. Click [Others].
4. Click [Register].
Register
Display Mode ...
Sel User Prog
Assign User Prog
Assign User Prog-H
Assign User Prog-V
F-KEY List ...
Clear F-KEY Setting ...
H-Scan Range
V-Scan Range
[Sel User Prog] = [H/V Individual]
*: H/V Interlock: Effective on both H and V displays.
H/V Individual: Select the display to use with the H/V/S key.
5. Do one of the following then push the left button.
• For [H/V Interlock]: Select [Assign User Prog].
• For [H/V Individual]: Select Assign [User Prog-H/S] or [Assign User Prog-V].
6. Click [Changeable]. One of the following displays appears depending on your se-
lection.
"Assign User Prog"
Quit
: H/V Individual
Quit
Cancel Cancel
P1-H
P2-H
P3-H
P4-H
P5-H
P6-H
P7-H
P8-H
P9-H
P10-H
"User Prog-H"
5. HOW TO CUSTOMIZE THE SONAR
Register
Display Mode ...
Sel User Prog
Assign User Prog
Assign User Prog-H
Assign User Prog-V
F-KEY List ...
Clear F-KEY Setting ...
H-Scan Range
V-Scan Range
[Sel User Prog] = [H/V Interlock]
Quit Quit
Cancel
P1-V P1
P2-V P2
P3-V P3
P4-V P4
P5-V P5
P6-V P6
P7-V P7
P8-V P8
P9-V P9
P10-V P10
"User Prog-V"
Quit
: H/V Interlock
5-7