Table of Contents
Advertisement
Printing on Unregistered Custom Size Paper
Contents
Previous
Printing
>
Various Print Functions
Printing on Unregistered Custom Size Paper
Follow the procedure below to print on unregistered custom size paper.
Open the [Page Setup] dialog box from the application.
The [Page Setup] dialog box is usually opened by clicking [Page Setup...] on the [File] menu, but the method to
open it may differ in some applications. Open the dialog box according to the application being used.
Open the printer properties dialog box from the [Page Setup] dialog box.
Click the [Page Settings] tab.
In the [Original size:] list, click [Custom paper size...].
The [Custom Paper Size] dialog box appears.
In the [Long edge:] and [Short edge:] boxes, enter values.
To change the measurement unit, click [Measurement Unit...].
In the [Paper source tray:] list, select a paper tray.
In the [Paper Position in Tray] area, select a paper orientation.
Click [OK].
To register the paper size as a custom paper size, click [Open [Custom Paper Sizes]...].
Click the [Setup] tab.
Check that the tray with the paper you want to print on is selected in the [Paper source tray:] list.
Click the [Page Settings] tab.
Click [Portrait] or [Landscape].
Select the orientation that matches the document orientation and feeding direction.
Make the necessary settings, and then click [OK].
The printer properties dialog box closes.
Check that the orientation selected in the [Page Setup] dialog box of the application is the same as that
selected in step
If it is not, make the correct setting.
file:///E|/shared/pdf-work/newfiles/pp2w/Op_Guide/int/0046.htm (1 of 2)2005/10/05 12:03:36
Next
> Printing on Unregistered Custom Size Paper
.
Settings
Advertisement
Table of Contents
