Specifying an I/O Timeout
Contents
Previous
Printer Driver
>
Maintaining the Printer Using Utilities
Specifying an I/O Timeout
Follow the procedure below to specify the amount of time the printer will wait for more information from the
computer sending the print data before it times out.
1.
Open the printer properties dialog box.
2.
Click the [Maintenance] tab.
3.
Click [Restore Defaults/Other Settings].
The [Restore Defaults/Other Settings] dialog box appears.
4.
In the [Select a time period] area, select the amount of time in the [I/O Timeout:] list.
5.
Click [OK].
Even if you change the [I/O Timeout:] setting, the displayed setting remains unchanged.
Opening from the Start Menu
Opening from an Application
Top
Copyright © 2005 All rights reserved.
file:///E|/shared/pdf-work/newfiles/pp2w/Op_Guide/acc/0091.htm2005/10/05 12:07:50
Next
>
Restore Defaults/Other Settings
Previous
Next
> Specifying an I/O Timeout
Settings