Table of Contents
Advertisement
Paper Size Mismatch (Tray 2)
Contents
Previous
Troubleshooting
>
Printer Status Monitor Errors
Paper Size Mismatch (Tray 2)
Paper of the incorrect size is loaded. Follow the procedure below to load the correct size of paper or change the paper
size in the printer properties settings.
A4/Letter size paper is loaded here.
Load A4/Letter size paper in (portrait) orientation.
Open the printer properties dialog box from the application.
Click the [Page Settings] tab.
In the [Original size:] and [Printout paper size:] lists, check document and paper sizes. To change the
paper size, select a paper size in the [Printout paper size:] list.
To enable the [Printout paper size:] list, select the [Reduce/Enlarge] check box.
If incorrect document and paper sizes are selected in the [Original size:] and [Printout paper size:] lists, cancel printing, and then select
the correct sizes.
If paper of the incorrect size is loaded, proceed to the next step.
Hold the grip on tray 2 (optional), lift the tray slightly, and then pull it out.
When the output tray is lifted, tray 2 (optional) will pop out slightly. Pull tray 2 (optional) completely out. Take care not to drop it.
Lift off the cover.
file:///E|/shared/pdf-work/newfiles/pp2w/Op_Guide/int/t0014.htm (1 of 4)2005/10/05 12:05:15
Next
> Paper Size Mismatch (Tray 2)
Settings
Advertisement
Table of Contents
