Table of Contents
Advertisement
Paper Handling Precautions
Cautions to Observe After Printing
Depending on the paper type, the ink may take a while to dry. Before handling, make sure printed sheets have
fully dried. otherwise, the ink may smudge.
file:///E|/shared/pdf-work/newfiles/pp2w/Op_Guide/acc/0102.htm (3 of 4)2005/10/05 12:08:03
The glossy side (or the pearl side) of the paper is the printing surface.
Handle paper by the edges so as not to dirty or leave fingerprints on the print side.
Make sure that sheets are not badly bent or scratched, and the print side is not damaged.
Only one-sided printing is possible.
Before handling, make sure printed sheets have fully dried.
If you want to stack prints soon after they are printed, we recommend inserting a moisture-
absorbent sheet, like copy paper, between prints.
Make sure that the output tray has no more than twenty sheets stacked on it.
Semi-gloss photo paper is designed for photograph printing. For graphics, we recommend plain or
inkjet plain paper.
When using these sheets, see the instructions supplied with them.
Inkjet transparency
Identify the print side by orientating the sheet vertically, so that the notched corner is at the bottom
left. The side facing you is the print side.
Load one sheet at a time. If multiple sheets are loaded, the leading edge of transparencies may get
scratched.
Handle sheets by the edges so as not to dirty or leave fingerprints on the print side.
Make sure that sheets are not badly bent or scratched, and the print side is not damaged.
Only one-sided printing is possible.
Remove sheets from the output tray individually, as they come out.
Before handling, make sure printed sheets have fully dried.
If you want to stack prints soon after they are printed, we recommend inserting a moisture-
absorbent sheet, like copy paper, between prints.
Ink takes time to dry. To prevent sheets from sticking together, remove them from the output tray
individually, as they come out.
If printing comes out streaked, adjust the paper feed level. See
Use at 15-25°C (59-77°F) and 30-70% humidity.
Use as soon as possible after opening the package.
When using these sheets, see the instructions supplied with them.
Envelopes
Up to 30 envelopes can be loaded in tray 1.
If the envelopes bulge, flatten them.
Load envelopes carefully, because the printable area depends on the orientation. See
Area.
Thick paper
Use tray 1 to load paper lighter than 105 g/m
You can insert paper with weights up to 163 g/m
Insert paper with the print side face up into the bypass tray.
Adjust Paper
2
(198.5 lb.).
2
(308.7 lb.) into the bypass tray.
Feed.
Printable
Advertisement
Table of Contents
