Table of Contents
Advertisement
Removing Paper Jammed in the Bypass Tray
Insert a sheet of paper into the bypass tray with the print side face up.
Printing starts when you push in the paper.
Printing cannot start until the machine finishes cleaning its head. Load the paper in the bypass tray when cleaning
finishes.
When using the bypass tray, make sure the sheet of paper is between the top and bottom of the bypass tray guides.
Paper can only be inserted one sheet at a time.
Support the sheet with your hands to keep it from sliding out and dropping.
Insert the sheet straight into the bypass tray.
Paper Is Not Fed or Delivered Normally
Top
Copyright © 2005 All rights reserved.
file:///E|/shared/pdf-work/newfiles/pp2w/Op_Guide/int/t0003.htm (3 of 3)2005/10/05 12:04:54
Previous
Next
Advertisement
Table of Contents
