Table of Contents
Advertisement
Registration
Contents
Previous
Printer Driver
>
Maintaining the Printer Using Utilities
Registration
Follow the procedure below to adjust where to start printing on paper loaded in each paper tray after checking the test
pattern printed.
To check the printed test pattern, proceed to step 8..
1.
Open the printer properties dialog box.
2.
Click the [Maintenance] tab.
3.
Click [Registration].
4.
In the [Unit type:] list, select a paper tray. In the [Paper type:] list, select a paper type.
5.
Click [Next >].
6.
Check that A4/Letter size paper is loaded in the paper tray.
7.
Click [Next >].
A test pattern to adjust the print start position is printed.
8.
Check the optimal adjustment values on the printed test pattern.
file:///E|/shared/pdf-work/newfiles/pp2w/Op_Guide/acc/m0003.htm (1 of 2)2005/10/05 12:07:46
Next
> Registration
Do not perform other operations during printing.
Fold the test pattern sheet in half lengthwise.
The optimal adjustment value is the difference between the single vertical line and the cross's vertical line that you can see when the
folded paper is held up to light. When the difference is one calibration mark in the "+" direction, the optimal adjustment value for
the [Printing direction:] is "+1.0".
Settings
Advertisement
Table of Contents
