Table of Contents
Advertisement
Printing
Contents
Previous
Printing
>
Custom Settings
> Printing
Printing
Follow the procedure below to print with the registered custom settings.
The printer configuration settings must be made beforehand.
Open the file you want to print from the application, and then open the printer properties dialog box.
On the [Setup] tab, select a setting in the [Custom Settings:] list.
Click [No setting] to print with the standard settings.
On the [Page Settings] tab, check that the document orientation and size are the same as those selected
in the application.
Usually the settings made in the application are reflected here; however, it depends on the application used. If they are not reflected,
make the correct settings.
To print multiple sets, enter the number of sets in the [Copies] box.
On the [Setup] tab, click [Normal Print] in the [Job type:] list.
A paper tray and paper type are included in a registered custom setting. If you want to print on paper that is different from the one in the
selected custom setting, you can select the paper tray and paper type you want to use on the [Setup] tab.
Make the necessary settings, and then click [OK].
The printer properties dialog box closes.
Make print settings, and then click [OK].
For details about specifying the installed options, see the printer driver Help.
Opening from an Application
Top
Copyright © 2005 All rights reserved.
file:///E|/shared/pdf-work/newfiles/pp2w/Op_Guide/int/0061.htm2005/10/05 12:03:53
Next
Previous
Next
Settings
Advertisement
Table of Contents
