Ricoh Provence-P2W User Manual page 106

Creating a New Overlay Image File
Contents Previous
Printing > Various Print Functions
Creating a New Overlay Image File
Follow the procedure below to create an overlay image file.
You can create an overlay image file with any application.
When an overlay image file is created using a multiple-page document, only the first page will be saved as an overlay image.
Open the file with which you want to create an overlay image file, and then open the printer properties
dialog box.
On the [Setup] tab, click [Save as Overlay Data...] in the [Job type:] list.
The [Job Type Details] dialog box appears.
In the [File name:] box, enter a file name.
Enter a name using up to 32 characters.
Under Windows 95/98/Me, enter a name using up to eight characters.
Click [OK].
Make the necessary settings, and then click [OK].
The printer properties dialog box closes.
When creating an overlay image file (when [Save as Overlay Data...] is selected in the [Job type:] list), only print quality settings are
available.
Click [OK] in the [Print] dialog box.
The overlay image file is created.
Opening from an Application
Top
Copyright © 2005 All rights reserved.
file:///E|/shared/pdf-work/newfiles/pp2w/Op_Guide/int/0057.htm2005/10/05 12:03:49
Next
> Printing Documents with an Overlay Image Superimposed (Overlay)
Previous Next
> Creating a New Overlay Image File
Settings