Table of Contents
Advertisement
Reducing and Enlarging to Fit the Paper Size (Fit to paper size)
Contents
Previous
Printing
>
Various Print Functions
Reducing and Enlarging to Fit the Paper Size (Fit to paper size)
Follow the procedure below to print document pages reduced or enlarged to fit the paper size. By specifying a
document and paper size, an appropriate reduction or enlargement ratio is selected automatically. This is useful when
reducing or enlarging from or to standard paper sizes such as when reducing an A3/11" × 17" document to A5/5
1
8
/
" paper.
2
1.
Open the file you want to print from the application, and then open the printer properties dialog box.
2.
Click the [Page Settings] tab.
3.
Check that the document orientation and size are the same as those selected in the application.
4.
Select the [Reduce/Enlarge] check box, and then click [Fit to paper size] in the list.
5.
In the [Printout paper size:] list, select a paper size.
Select the size of paper loaded in the paper tray.
6.
Make the necessary settings, and then click [OK].
The printer properties dialog box closes.
7.
Make print settings, and then click [OK].
Opening from an Application
Top
Copyright © 2005 All rights reserved.
file:///E|/shared/pdf-work/newfiles/pp2w/Op_Guide/acc/0040.htm2005/10/05 12:06:53
Next
> Reducing and Enlarging to Fit the Paper Size (Fit to paper size)
Usually the settings made in the application are reflected here; however, it depends on the application used. If they are not reflected,
make the correct settings.
An automatically selected ratio appears in the [Scaling(%):] box.
Previous
Next
Settings
1
/
" ×
2
Advertisement
Table of Contents
