Removing Paper Jammed in the Bypass Tray
5.
Insert a sheet of paper into the bypass tray with the print side face up.
Printing starts when you push in the paper.
Printing cannot start until the machine finishes cleaning its head. Load the paper in the bypass tray when
cleaning finishes.
file:///E|/shared/pdf-work/newfiles/pp2w/Op_Guide/acc/t0003.htm (4 of 5)2005/10/05 12:08:16
The [Resume] key stops blinking and stays lit.
When using the bypass tray, make sure the sheet of paper is between the top and bottom of the bypass tray guides.