Ricoh Provence-P2W User Manual page 111

Registering
Contents Previous
Printing > Custom Settings > Registering
Registering
Follow the procedure below to register a new custom setting.
Up to 16 custom settings can be registered.
Open the printer properties dialog box.
Click the [Setup], [Page Settings], or [Edit] tab.
In the [Custom Settings:] list, select the custom setting on which you want to base the new custom
setting.
To base the new setting on the default settings, click [No setting].
When creating a new custom setting based on an existing custom setting, select the custom setting from which you can make the new
setting with the least changes.
Make the settings on the [Setup], [Page Settings], and [Edit] tabs.
Settings not included in a custom setting are as follows: [Job type:] on the [Setup] tab, [Original orientation:], [Original size:], [Printout
paper size:], and [Copies] on the [Page Settings] tab, and all settings in the [Printer Configuration] dialog box.
Click [Save...].
The [Save New Custom Setting] dialog box appears.
In the [Custom Setting name:] box, enter a custom setting name.
Up to 36 characters can be entered.
Click [OK].
The custom setting is registered and added to the list.
Click [OK].
The printer properties dialog box closes.
Opening from the Start Menu
file:///E|/shared/pdf-work/newfiles/pp2w/Op_Guide/int/0062.htm (1 of 2)2005/10/05 12:03:54
Next Settings