Table of Contents
Advertisement
Collating
Contents
Previous
Printing
>
Various Print Functions
Collating
Follow the procedure below to print complete sets of prints one set at a time when printing multiple sets such as for
presentation materials.
Depending on the application, this setting may not be usable.
Even when using the Collate function with Layout, Poster, or Duplex, document boundaries are correctly recognized so problems like the
first page and last page being printed on the same sheet do not occur.
Open the file you want to print from the application, and then open the printer properties dialog box.
Click the [Page Settings] tab.
In the [Copies] box, enter the number of sets you want to print between 1 and 999.
Select the [Collate] check box.
Make the necessary settings, and then click [OK].
The printer properties dialog box closes.
Make print settings, and then click [OK].
Opening from an Application
Top
Copyright © 2005 All rights reserved.
file:///E|/shared/pdf-work/newfiles/pp2w/Op_Guide/int/0038.htm2005/10/05 12:03:27
Next
> Collating
Previous
Next
Settings
Advertisement
Table of Contents
