Removing Paper Jammed in the Bypass Tray
Paper can only be inserted one sheet at a time.
Support the sheet with your hands to keep it from sliding out and dropping.
Insert the sheet straight into the bypass tray.
If it is difficult to remove jammed paper, follow the procedure below to remove it.
Unlock the duplex unit at the back of the machine by raising the levers on its sides. Then, detach the
duplex unit.
Remove jammed paper.
Reinstall the duplex unit in its original position.
Press the [Resume] key.
The [Resume] key stops blinking and stays lit.
file:///E|/shared/pdf-work/newfiles/pp2w/Op_Guide/int/t0003.htm (2 of 3)2005/10/05 12:04:54