Ricoh Provence-P2W User Manual page 384

Updating Custom Settings According to the Current Printer Configuration
Contents Previous
Printing > Custom Settings > Updating Custom Settings According to the Current Printer Configuration
Updating Custom Settings According to the Current Printer Configuration
There are two kinds of custom settings displayed in the printer properties dialog box: those registered automatically
during installation of the printer driver and custom settings added later by the user. Since these custom settings are not
deleted automatically, depending on the installed options, some custom settings that cannot be used to print may
remain.
To keep only custom settings that can be used with the options installed, follow the procedure below to update custom
settings after you install or uninstall options. The following is how each kind of custom settings will be updated:
Custom settings registered automatically during printer driver installation
Custom settings that can still be used remain registered. Custom settings that cannot be used are deleted.
Custom settings registered by user
Custom settings that cannot be used are deleted. Deleted custom settings cannot be recovered.
If bidirectional communication is not working, you must configure installed options in the [Printer Configuration] dialog box before
performing this procedure.
1. Open the printer properties dialog box.
2. Click the [Setup], [Page Settings], or [Edit] tab.
3. Click [Manage...].
The [Manage Custom Settings] dialog box appears.
4. Click [Refresh Printer Information].
5. Click [Close].
6. Click [OK].
The printer properties dialog box closes.
Checking Whether Bidirectional Communication is Working or Not
For details about [Printer Configuration], see the printer driver Help.
Opening from the Start Menu
Opening from an Application
file:///E|/shared/pdf-work/newfiles/pp2w/Op_Guide/acc/0065.htm (1 of 2)2005/10/05 12:07:22
Next
If bidirectional communication is working, printer configuration settings in the [Accessories] area and custom settings in the
[Custom Settings:] list are updated.
If bidirectional communication is not working, custom settings in the [Custom Settings:] list are updated according to the current
printer configuration settings in the [Accessories] area.
Settings