Paper Size Mismatch (Bypass Tray)
Contents
Previous
Troubleshooting
>
Printer Status Monitor Errors
Paper Size Mismatch (Bypass Tray)
Paper of the incorrect size is loaded. Follow the procedure below to load the correct size of paper or change the paper
size in the printer properties settings.
Open the printer properties dialog box from the application.
Click the [Page Settings] tab.
In the [Original size:] and [Printout paper size:] lists, check document and paper sizes. To change the
paper size, select a paper size in the [Printout paper size:] list.
To enable the [Printout paper size:] list, select the [Reduce/Enlarge] check box.
If incorrect document and paper sizes are selected in the [Original size:] and [Printout paper size:] lists, cancel printing, and then select
the correct sizes.
If paper of the incorrect size is loaded, proceed to the next step.
Slide the bypass tray guides into position according to the paper size.
Insert a sheet of paper into the bypass tray with the print side face up.
file:///E|/shared/pdf-work/newfiles/pp2w/Op_Guide/int/t0012.htm (1 of 3)2005/10/05 12:05:13
Next
> Paper Size Mismatch (Bypass Tray)
Settings