Table of Contents
Advertisement
Changing the Image Data Process
Contents
Previous
Printing
>
Adjusting Print Quality
Changing the Image Data Process
Depending on the application, there may be cases where printing takes a long time or colors are not printed correctly.
Follow the procedure below to change the image data process to solve the problem.
Since changing the image data processing method may cause printing not to be performed correctly with some applications, you should
normally leave this option unselected.
1.
Open the file you want to print from the application, and then open the printer properties dialog box.
2.
On the [Setup] tab, click [User settings] in the [Print Quality] area.
3.
Click [Change...].
The [Change User Settings] dialog box appears.
4.
Click the [Misc.] tab.
5.
Select the [Change data processing] check box.
6.
Click [OK].
The [Change User Settings] dialog box closes.
7.
Make the necessary settings, and then click [OK].
The printer properties dialog box closes.
8.
Make print settings, and then click [OK].
Opening from an Application
Top
Copyright © 2005 All rights reserved.
file:///E|/shared/pdf-work/newfiles/pp2w/Op_Guide/acc/0031.htm2005/10/05 12:06:43
Next
>
Printing with Print Quality Settings You Want
Previous
Next
> Changing the Image Data Process
Settings
Advertisement
Table of Contents
