Table of Contents
Advertisement
Printing Is Uneven, Too Heavy, or Too Light
Contents
Previous
Troubleshooting
>
Print Results Are Not Satisfactory
Printing Is Uneven, Too Heavy, or Too Light
If there is a problem with the quality of the printing such as uneven printing or an inappropriate amount of ink being
used, the following questions should be addressed.
Is an old Print cartridge being used?
Print cartridges should be opened before their expiration date and used within six months of being opened.
Does the paper type setting match?
Make sure that the paper type setting of the printer driver matches the type of paper loaded. See
Paper Types
Are you printing on the wrong side of the paper?
Check which side should be printed on when using inkjet plain paper. If you print on the wrong side, the quality of the
printing may be lower and the inside of the printer may get dirty. See
Is the setting of the envelope selector suitable?
The printed side may become worn depending on the type of image. If this happens, set the envelope selector to the
rear position
Is the brightness of the image suitable?
If the printing is being smeared even when the envelope selector is set to the rear position
printing may be too high. Increase the brightness of the image.
Is the [Duplex/Booklet] check box selected?
Duplex printing tends to produce fainter prints than single-sided printing. When performing single-sided printing,
make sure the [Duplex/Booklet] check box is not selected.
Top
Copyright © 2005 All rights reserved.
file:///E|/shared/pdf-work/newfiles/pp2w/Op_Guide/int/0119.htm2005/10/05 12:05:01
Next
> Printing Is Uneven, Too Heavy, or Too Light
.
.
Previous
Next
Printing on Various
Paper Handling Precautions
, the density of the
Settings
.
Advertisement
Table of Contents
