Table of Contents
Advertisement
Paper Handling Precautions
Paper storage precautions
Paper type precautions
file:///E|/shared/pdf-work/newfiles/pp2w/Op_Guide/int/0102.htm (2 of 4)2005/10/05 12:04:41
When using the bypass tray, make sure the envelope or sheet of paper is between the top and bottom of
the bypass tray guides.
Do not store paper in humid places.
Do not store paper in direct sunlight.
Store paper flat.
Store unused paper in the original package.
Plain paper
Use the bypass tray to print on paper heavier than 105 g/m
The only type of A6 (105 × 148 mm(4.2 × 5.9 inches)) paper that can be loaded in tray 1 is that of
2
105 g/m
(198.5 lb.).
After printing, some types of paper take longer than others to dry. With duplex printing, the ink
may smear or rub off. Using the printer driver, specify how long to wait for the prints to dry
between printing each side of a duplex sheet. For details, see the printer driver Help.
Printer Properties Dialog Box
Inkjet plain paper
When printing on inkjet plain paper, in the printer properties dialog box, click [Inkjet Plain Paper].
This allows printing at higher quality.
In the printer properties dialog box, when [Inkjet Plain Paper] is selected, only one-sided printing
is possible. To print on both sides of a sheet, click [Plain].
The ink may smear depending on the type of image. If this happens, set the envelope selector to
the rear position
Use as soon as possible after opening the package.
Semi-gloss photo paper
.
2
(198.5 lb.).
Opening the
Advertisement
Table of Contents
