Ricoh Provence-P2W User Manual page 308

Printing on Thick Paper
Contents Previous
Printing > Printing on Various Paper Types
Printing on Thick Paper
Follow the procedure below to print on thick paper and label paper. Thick paper and label paper are fed from the
bypass tray.
Paper heavier than 105 g/m
tray 2 (optional).
To use Paper lighter than 105 g/m
1. Open the printer properties dialog box from the application.
2. On the [Setup] tab, click [Thick] in the [Paper type:] list.
3. Make the necessary settings, and then click [OK].
A confirmation message appears.
4. Check the message, and then click [OK].
5. Make print settings, and then click [OK].
6. Slide the envelope selector to the rear position
7. Slide the bypass tray guides into position according to the paper size.
file:///E|/shared/pdf-work/newfiles/pp2w/Op_Guide/acc/0005.htm (1 of 3)2005/10/05 12:06:14
Next
> Printing on Thick Paper
2
(198.5 lb.) is inserted into the bypass tray one sheet at a time. Paper lighter than that can be loaded into tray 1 or
2
(198.5 lb.), click [Plain] in the [Paper type:] list.
The [Resume] key lights.
.
Settings