Table of Contents
Advertisement
Saving a Registered Custom Setting in a File
Contents
Previous
Printing
>
Custom Settings
> Saving a Registered Custom Setting in a File
Saving a Registered Custom Setting in a File
Follow the procedure below to save a registered custom setting in a custom setting file.
Under Windows 2000/XP, Windows Server 2003, or Windows NT 4.0, this function is unavailable.
1.
Open the printer properties dialog box.
2.
Click the [Setup], [Page Settings], or [Edit] tab.
3.
Click [Manage...].
The [Manage Custom Settings] dialog box appears.
4.
Select the custom setting you want to save.
5.
Click [Save Custom Setting...].
The [Save Custom Setting] dialog box appears.
6.
In the [File name:] box, enter a file name.
7.
Click [OK].
The [Save Custom Setting] dialog box closes. The custom setting is saved in a custom setting file.
Opening from the Start Menu
Opening from an Application
Top
Copyright © 2005 All rights reserved.
file:///E|/shared/pdf-work/newfiles/pp2w/Op_Guide/acc/0067.htm2005/10/05 12:07:24
Next
Up to eight characters can be entered.
The extension is .rst.
Previous
Next
Settings
Advertisement
Table of Contents
