Table of Contents
Advertisement
Removing Paper Jammed in the Bypass Tray
Printing starts when you push in the paper.
Printing cannot start until the machine finishes cleaning its head. Load the paper in the bypass tray when
cleaning finishes.
If it is difficult to remove jammed paper, follow the procedure below to remove it.
1.
Unlock the duplex unit at the back of the machine by raising the levers on its sides. Then, detach the
duplex unit.
file:///E|/shared/pdf-work/newfiles/pp2w/Op_Guide/acc/t0003.htm (2 of 5)2005/10/05 12:08:16
When using the bypass tray, make sure the sheet of paper is between the top and bottom of the bypass tray guides.
Paper can only be inserted one sheet at a time.
Support the sheet with your hands to keep it from sliding out and dropping.
Insert the sheet straight into the bypass tray.
Advertisement
Table of Contents
