Table of Contents
Advertisement
Printing Documents with an Overlay Image Superimposed (Overlay)
Contents
Previous
Printing
>
Various Print Functions
Printing Documents with an Overlay Image Superimposed (Overlay)
Follow the procedure below to print a document with an overlay image superimposed.
Before printing using the Overlay function, an overlay image file and overlay set must be created.
A superimposing image will be aligned with the document page at the upper left corner. If the document to be printed and superimposing
image differ in size and orientation, the superimposing image may be cut or run off.
Depending on the application, you may not get the expected result.
1.
Open the file you want to print from the application, and then open the printer properties dialog box.
2.
Click the [Edit] tab.
3.
Select the [Watermarks/Overlay] check box, and then select an overlay set in the list.
4.
Make the necessary settings, and then click [OK].
The printer properties dialog box closes.
5.
Make print settings, and then click [OK].
Overlay image file:
Data saved in a format allowing it to be used as a superimposing image.
Overlay set:
An overlay image file and setting details (such as how and which page an overlay image is superimposed on) are
combined, named, and registered as a set. Each set registered is called an overlay set.
When printing, select an overlay set.
Opening from an Application
Related topics
Creating a New Overlay Image File
Deleting an Overlay Image File
file:///E|/shared/pdf-work/newfiles/pp2w/Op_Guide/acc/0056.htm (1 of 2)2005/10/05 12:07:12
Next
> Printing Documents with an Overlay Image Superimposed (Overlay)
To edit the overlay set, click [Edit...].
To create a new overlay set, click [Add Overlay....].
Settings
Advertisement
Table of Contents
