Post-Installation Check; System Info; System Info Datalink Page; Figure 24: System Info-Datalink Page - Avidyne Entegra EX5000 MFD Series Installation Manual

EX5000 Installation Manual
P/N 600-00073 Rev 24

6 Post-Installation Check

After installing the MFD, you need to perform a post-installation check to ensure that all components
are working properly.
This section contains the following information:
● Section 6.1, "System Info Pages" on page 83
●
Section 6.2, "Electro-Magnetic Compatibility (EMC) Check" on page 85
● Section 6.3, "Lightning Sensor Strike Test" on page 85
●
Section 6.4, "Traffic Test" on page 85
● Section 6.5, "2-Way Datalink Satellite Reception Confirmation" on page 85
●
Section 6.6, "Broadcast Datalink Satellite Reception Confirmation" on page 86
● Section 6.7, "Magnetic Compass Swing" on page 87
6.1 System Info Pages
Avidyne provides three System Info pages to help you determine if system settings are correct and
functioning.

6.1.1 System Info Datalink Page

The Datalink Page provides information about your Narrowcast and Broadcast set up, as well as UTC
time and other information.
Figure 24: System Info—Datalink Page
- 83 -