Using The Configuration Save And Restore (Csr) Utility - Avidyne Entegra EX5000 MFD Series Installation Manual

5.3 Using the Configuration Save and Restore (CSR) Utility

When performing an upgrade or replacement to an existing MFD, you may want to use the
Configuration Save and Restore CSR) Utility. This utility allows you to save off many of the
configuration options that had previously been set on the MFD, including:
●
Fuel Calibration (where available). Fuel Calibration is described in Fuel Quantity Calibration
(Optional) on page 71.
● Any added-cost utilities such as TAWS, CMax, and Broadcast Datalink (as described in Section
5.2, "Optional MFD Function Activation Utilities" on page 31).
●
Engine Setup parameters, as described in Section 5.10, "Engine Instruments Setup" on page 67.
●
Lightning, Traffic, GPS, and MAP parameters, described in this section.
The CSR Utility can save you many hours of work and a CSR Utility Zip disk should be included as part
of the ship kit for MFD Upgrades.
For detailed information about the CSR Utility, see the Avidyne Service Bulletin EX5000 Save &
Restore Utility, Document Number 601-0004-056.
- 32 -
EX5000 Installation Manual
P/N 600-00073 Rev 24