Lightning Sensor Setup; Figure 10: Selection Page; Figure 11: Wx-500 Setup Page - Avidyne Entegra EX5000 MFD Series Installation Manual

EX5000 Installation Manual
P/N 600-00073 Rev 24

5.6.1 Lightning Sensor Setup

➤
To configure the Lightning sensor:
1. From the Maintenance Mode Page, select Lightning Setup. The selection page is displayed:

Figure 10: Selection Page

2. Choose the sensor to be connected to the MFD. The Setup Page is displayed.
For the WX-500 Setup The screen shown in Figure 11 is displayed.

Figure 11: WX-500 Setup Page

For the TWX-670 Setup, the screen shown in Figure 12 is displayed.
- 42 -