Working In Maintenance Mode - Avidyne Entegra EX5000 MFD Series Installation Manual

5.4.2 Working in Maintenance Mode

As shown in Figure 7, the Maintenance Mode Page contains setup buttons for the available EX5000
features. When you select a Setup feature, the appropriate page displays. From the Setup page, the
following options will always be available:
●
Select Knob—Rotate to change the highlighted parameter box.
● Change Knob—Rotate to select a parameter to modify from the highlighted box.
●
Save—Store any setup changes made since entering the page and return to the Maintenance
Mode Main page.
●
Cancel—Return to the Maintenance Mode Main page without saving your changes
➤
When working in Maintenance Mode:
1. After making changes to each setup page press Save to save your changes and return to the main
menu.
To exit without saving your changes, press Cancel.
2. Changes in the setup pages do not take effect until the MFD has been restarted. From the
Maintenance Mode Page, press Restart System.
➥
Avidyne suggests that you restart the system after you make changes to each setup page.
If no changes were made, press Back to Map to exit Maintenance Mode.
- 34 -
EX5000 Installation Manual
P/N 600-00073 Rev 24