Avidyne Entegra EX5000 MFD Series Installation Manual page 79

Table of Contents

Advertisement

EX5000 Installation Manual
P/N 600-00073 Rev 24
2. Depending on the aircraft type and model, you may need to select the Sensor Type installed in
this airplane, which will be one of:
Avidyne SIU
Vision DPU
Avidyne DAU
Avidyne SIU/DAU
Not all aircraft require that you select the sensor type.
3. Select the model of this plane from the Aircraft Model pull-down list.
!
Ensure that you select the airplane type and model that matches this aircraft. Selecting
the wrong model can result in displaying inaccurate data.
!
After you select the aircraft type, you must select a valid port for the connection, or
press Cancel to cancel the setup. Pressing the Save button before you select a Port can
cause the MFD to hang in an unusable state that must be factory reset.
For Software Part Number 530-00180-200 only: Ensure that you enter the Aircraft
Model before pressing the Save button.
!
If you set the SIU/DAU Type to Avidyne SIU/DAU and press Save without specifying the
Aircraft Type, the MFD will become unusable after restarting. In this case, you will need
to replace the Compact Flash for the aircraft.
4. Depending on the aircraft type and model, the appropriate options are displayed. These options
may include the following:
Port—If this option is available, select the MFD RS232 port to which the Engine interface unit
is wired.
For twin-engine aircraft, make selections for both the left and right ports.
Note:
DAU ARINC Port—Select the ARINC port to which the Engine interface unit is wired.
Electrical/Rudder Trim Port—Select the RS232 port from which electrical and rudder trim
information will be received.
Fuel Quantity Port—Select the RS232 port from which fuel quantity will be received.
Fuel Units—Select whether to display fuel information in English or metric units.
Fuel Tank Size—In gallons (Cirrus DAU aircraft only). Select the appropriate tank size for this
aircraft.
!
If Fuel Tank Size displays, it is very important that you select the correct tank size for the
aircraft. The MFD uses the selected tank size to determine fuel quantity.
Fuel to Tabs—In gallons (Cirrus DAU aircraft only). Select the appropriate fuel to tabs level
for this aircraft.
- 69 -

Advertisement

Table of Contents
loading

Table of Contents