8812Xl Sfp+ Module - Avaya 8800 Installation Manual

Avaya Ethernet Routing Switch 8800/8600 module fundamentals
Type
Module
The Ethernet Routing Switch 8800/8600 8648GTRS is an RS module and supports the
following:
• 256 000 IP routes
• 64 000 MAC records
• Release 4.1 and earlier: 16 000
Release 5.0 and later: 32 000

8812XL SFP+ module

The 8812XL SFP+ I/O module supports twelve 10 Gbps ports, four for each lane. The 8812XL
SFP+ module is an 8800 series module. For general information on 8800 series modules, and
information on the supported switch fabric and power supplies, see
page 28.
The 8812XL module exhibits the same functionality as the 8612XLRS module. Thorough
engineering testing indicates that on a chassis, an 8812XL module can replace an 8612XLRS
module with no loss of configuration.
The 8812XL uses enhanced small form-factor pluggable (SFP+) transceivers instead of the
XFP transceivers. SFP+ optics modules are hot pluggable, serial-to-serial, data agnostic, multi-
48 Installation — Modules
Label Color, State
Amber, Steady
Off
Online Green, Steady
Amber, Steady
Amber, Blinking
Off
Comments? infodev@avaya.com
Meaning
The port is administratively
disabled.
The port has no link.
The module has completed the
power-on self-test and software
initialization, and is operating
normally.
• The module slot is disabled or
initializing the software.
• The module failed to boot
because, for example, the image
file failed to load.
The module failed to boot.
The switch power is off or there is
no power to the module.
If the switch power is on, the module
is performing the power-on self-
test.
A module in this state is not yet
functional.
8800 series modules on
October 2014