Avaya 8800 Installation Manual page 69

Fan 1,2
Temp
Master
Online
Ethernet Management port
The Ethernet management port on the 8895SF/CPU module is an MDI 10/100/1000BaseT
port that allows out-of-band management of the switch using a Web browser or Enterprise
Device Manager. You can also establish a Telnet or SSH (Secure Shell) session to access the
CLI. Use this port to connect the switch to a network management station. The Ethernet
management port has its own IP address but does not switch traffic to other ports in the
chassis.
Note that you use this port only as a management port. This port provides out-of-band
management for the 8895 SF/CPU module.
Installation — Modules
Label
Off
Green/Steady
Amber/Steady
Green/Steady
Amber/Steady
Green/Steady
Green/Blinking
Amber/Steady
Off
Green/Steady
Amber/Steady
Off
Color, State
A power supply is not present in the
specified bay, or the power supply in
the specified bay is not turned on.
The specified fan is operating
normally.
The specified fan has failed.
The temperature is normal for switch
operation
The temperature of the switch has
exceeded the maximum operating
temperature.
The CPU subsystem on the module
is performing diagnostics.
This module is providing active CPU
functions for the switch and is the
master CPU module.
The CPU subsystem is in a fault
state.
The CPU subsystem on the module
is up and is in standby mode.
The switch fabric portion of the
module is online and is load-
sharing.
The switch fabric portion of the
module failed diagnostics.
The switch fabric portion of the
module is offline.
SF/CPU modules
Meaning
October 2014 69