Cable Requirements For The Avaya Virtual Services Platform 4000; Installation And Removal Of Small Form Factor Pluggable (Sfp) Transceivers; Installing Sfp Transceivers - Avaya VSP 4450GSX-PWR+ Installing

Installing the Avaya VSP 4000 4450GSX series
Cable requirements for the Avaya Virtual Services
Platform 4000
The following table describes the cables required for a an Avaya Virtual Services Platform 4000
switch.
Table 5: Switch cable requirements
Required Cable
10/100/1000Base TX Ports
10/100Base TX Ports
100BaseFX Ports
Console Port
SFP Transceiver Ports
USB Port
Installation and removal of Small Form Factor Pluggable
(SFP) transceivers
The following section describes how to install and remove Small Form Factor Pluggable (SFP)
transceivers in the Avaya Virtual Services Platform 4000 switch. For more information about SFP
transceiver use and designation, see Installing Transceivers and Optical components on VSP
Operating System Software, NN47227-301.

Installing SFP transceivers

Install SFP transceivers by performing this procedure.
1. Remove the transceiver from the protective packaging.
November 2016
Description
The interconnect cabling must conform to the Cat5e, Cat6, or Cat6e
specification of the Commercial Building Telecommunications Cabling
Standard, ANSI/TIA/EIA 568-B fitted with an RJ-45 Module jack.
The interconnect cabling for 10BaseT Ethernet must conform to Cat3,
Cat4, Cat5 (or better) UTP cabling for distances up to 100 meters.
The interconnect cabling for 100BaseTX Fast Ethernet must conform
to Cat5 (or better) UTP cabling for distances up to 100 meters.
The interconnect cabling must conform to 50/125 or 62.5/125 micron
multimode fiber-optic cabling for distances up to 3 kilometers.
Varies depending on the user device. The VSP 4000 has an RJ-45
female connector, so a serial cable with RJ-45 connectors, or a serial
cable with a DB-9 female connector on one end and an RJ-45 on the
other is appropriate. The maximum length for the console port cable
is 25 feet (8.3 meters).
Varies with the installed SFP transceiver. See the documentation
shipped with the SFP transceiver for specifications.
The USB port is usable with a USB drive for file transfer of config
files, log files and software images.
Installing Avaya Virtual Services Platform 4450GSX-PWR+ Switch
Comments on this document? infodev@avaya.com
24