Installing A Module - Avaya 8800 Installation Manual

Installing a module

Install a module to replace an existing module or to add new capability to your Ethernet Routing
Switch 8800/8600. Installing a module takes three to five minutes.
Prerequisites
Electrostatic alert:
Risk of equipment damage
Electrostatic discharge can damage hardware. Follow proper ESD-elimination
procedures.
Caution:
Risk of equipment damage
Before you insert a module into the chassis, inspect the backplane connectors on the chassis
and the connectors on the module. Be sure all connectors are free of blockage or damage
Installation — Modules
Figure 38: Removing a module from the 8010co chassis
Do not operate a chassis without either a filler panel or a module installed in a
slot.
Installing a module
October 2014 81