8895 Sf/Cpu Management Port - Avaya 8800 Installation Manual

Console port:
Modem port:
Cable specifications
Ethernet Management port:
Console port:
Modem port:
The following table provides power specifications for the 8895SF/CPU module.
Table 53: 8895 SF/CPU power specifications
3.3 V power (W)
12 V power (W)
Total power (W)

8895 SF/CPU Management port

The Management port is a 10/100 Mbps Ethernet port implemented on an RJ-45 connector
wired as an MDI connection.
The following table shows the pin assignments for this connector.
Table 54: Pin assignments: 8895 SF/CPU module Management port
Connector
Installation — Modules
Specification
Pin number
1 Output transmit data + (TX+)
2 Output transmit data - (TX-)
3 Input receive data + (RX+)
6 Input receive data - (RX-)
4, 5, 7, 8 Not used
8895 SF/CPU module specifications
DB-9 connector (see
Console port on page 118)
DB-9 connector (see
modem port on page 118)
Category 3, 4, or 5 UTP cable (10 Mbps
operation)
Category 5 UTP cable (100 Mbps
operation)
RS-232 cable
DTE-to-DCE cable (straight or transmit
cable)
16.08
52.48
68.56 W nominal / 90 W maximum
Signal
8895 SF/CPU
8895 SF/CPU
October 2014 117