Avaya 8800 Installation Manual page 99

3. Route the cable to the termination panel, loosely fastening it with velcro straps or
4. Fasten the connector to the termination panel end of the cable.
5. Label the unconnected end of the cable with the node identifier (from site records)
6. When all the transmitting cables from the same module are connected to the
Installation — Modules
Figure 46: Cable routing for 8010co chassis
sheet fiber along the path.
If you use cables manufactured by Avaya, the connectors are already fastened to
predetermined lengths of cable.
and the shelf, cage, slot, and port number.
termination panel, use velcro straps or sheet fiber wrapped around the cables to
manage them.
Connecting and managing cables
October 2014 99