8648Gtrs Module - Avaya 8800 Installation Manual

Avaya Ethernet Routing Switch 8800/8600 module fundamentals
Type
Module
The Ethernet Routing Switch 8800/8600 8648GBRS is an RS module and supports the
following:
• 256 000 IP routes
• 64 000 MAC records
• Release 4.1 and earlier: 16 000
Release 5.0 and later: 32 000

8648GTRS module

The 8648GTRS module is a 48-port RJ-45 10BASE-T/100BASE-TX/1000BASE-T module.
This module is an RS module. It supports IEEE 802.3 standards, including Auto-Negotiation.
The 8648GTRS module supports Custom Auto-Negotiation Advertisements (CANA). For more
information about CANA, see Avaya Ethernet Routing Switch 8800/8600 Configuration —
Ethernet Modules, NN46205-503.
The 8648GTRS module ports support Auto-MDIX. Auto-MDIX refers to automatic detection of
the connection type (straight-through or crossover) of an attached cable. When Auto-MDIX is
active, either a straight or a crossover cable can be used to provide a connection to a port, and
the interface automatically corrects any incorrect cabling, thereby removing the need for
crossover cables to interconnect switches.
46 Installation — Modules
Label Color, State
Off
Online Green, Steady
Amber, Steady
Amber, Blinking
Off
Comments? infodev@avaya.com
Meaning
The port is connected but not linked,
and has detected a Line/Remote
fault.
The module has completed the power-
on self-test and software initialization
and is operating normally.
• The module slot is disabled or
initializing the software.
• The module failed to boot because,
for example, the image file failed to
load.
The module failed to boot.
The switch power is off or there is no
power to the module.
If the switch power is on, the module is
performing the power-on self test.
A module in this state is not yet
functional.
October 2014