Sfp Port Leds - Avaya Virtual Services Platform 7000 Series Installation Manual

Preparations for network connectivity
Vendor
HP
If you use a verified third party device, the show interface gbic command output displays
the vendor SEEPROM data and the cable type.
Note:
The SEEPROM data output for third party cables might be different than the model number.
Avaya devices are recommended to provide maximum compatibility and support for the VSP
7000 Series.
Related topics:

SFP port LEDs

Installing SFP transceivers
SFP port LEDs
The switch front panel contains transmit (Tx) and receive (Rx) LEDs for each port. The following
table describes the SFP port LED status.
Tx
Rx
62 VSP 7000 installation
Model
487963–B21
on page 62
on page 63
LED
Off
Emerald (Solid)
Emerald (Flashing)
Amber (Solid)
Amber (Flashing)
Amber (Blinking)
Off
Emerald (Solid)
Emerald (Flashing)
Comments? infodev@avaya.com
Details
HP Blade Systems C-Class SFP+ direct attach
cable — 5 m
State
No SFP or SFP+ transceiver
detected.
SFP+ detected and link
established.
SFP+ link established and
transmitting.
SFP detected and link
established.
SFP link established and
transmitting.
Tx and Rx blink slow
indicating port is disabled.
No SFP or SFP+ transceiver
detected.
SFP+ detected and link
established.
SFP+ link established and
receiving.
Description
July 2013