Rcb Interface Ports - Juniper MX10003 Hardware Manual

Figure 17: JNP10003-RE1-LT RCB Ports
1 2 3
1 USB port
—
2 Management (MGMT) port
—
3 Console (CON) port
—
4 SSD LEDs
—
5 SSD slots (0 and 1)
—
6 Master (MST) LED
—
7 Alarm (ALM) LED
—
The MX10003 router with JNP10003-RE1-LT RCB supports only Junos Limited image. The Junos Limited
image does not have data-plane encryption and is intended only for countries in the Eurasian Customs
Union because these countries have import restrictions on software containing data-plane encryption.
Unlike the Junos Worldwide image, the Junos Limited image supports control plane encryption through
Secure Shell (SSH) and Secure Sockets Layer (SSL), thus allowing secure management of the system. The
Limited Restriction RCB boots only the encryption free Junos software and fails to boot if the fully encrypted
Junos software is used for booting. The Junos upgrade and VMHost upgrade using non-limited version of
Junos software fails on the JNP10003-RE1-LT RCB.
The command show chassis hardware [models | clei-models | extensive] displays the model number and
helps identifying the different SKUs. An alarm, Mixed Master and Backup RE types is displayed when
dissimilar Routing Engines are present on the chassis (see Chassis Alarms).

RCB Interface Ports

The ports located on the RCB, connect the RCB to one or more external devices on which system
administrators can issue Junos OS CLI commands to manage the router. In addition, ports to connect
external clock interfaces for BITS and GPS function are also available on the RCB.
The RCB interface ports with the indicated labels function are as follows (see
4 5 6 7
14 13 12 11
8 9
JNP10003-RE1-LT
10
8 Time of day (ToD) port with LEDs (This port is
—
reserved for future use)
9 BITS port with LEDs
—
10 Clocking ports
—
11 OFFLINE button
—
12 ONLINE LED
—
13 OK/FAIL LED
—
14 RESET button
—
Figure 16 on page 49):
50