Power Supply Cooling System; Mx10003 Fan Module Led - Juniper MX10003 Hardware Manual

Power Supply Cooling System

The power supplies are self-cooling and are located in the rear of the router (to the left and the right of
the rear of the chassis). The exhaust for the power supplies are also located on the rear of the chassis.
SEE ALSO
Replacing the MX10003 Air Filter Unit | 117
Replacing the MX10003 Air Filter | 119

MX10003 Fan Module LED

Each fan module contains one bicolor LED.
the fan module LED.
Table 11 on page 34 describes the behavior of the fan module LEDs.
Table 11: Fan Module LEDs
Label Color
STATUS Green
Red
SEE ALSO
Replacing an MX10003 Fan Module | 123
"MX10003 Cooling System Description" on page 31
State Description
Blinking Fan module hardware initialization complete and software
initialization pending.
On Software initialization complete and the fan is functioning normally.
steadily
On Faulty and not functioning normally
steadily
34
shows