Juniper MX10003 Hardware Manual page 103

NOTE:
For console devices, configure the serial port to the following values:
Baud rate—9600
Parity—N
Data bits—8
Stop bits—1
Flow control—none
Figure 31: Console and Auxiliary Cable Connector
Figure 32: Connecting a router to a Management Console Through a Console Server
CON
To Console Port
Figure 33: Connecting a router Directly to a Management Console
Table 37: Console Port on the RCB
Callout
(see Figure 29 on page
3
Console Server
CON
To Console Port
101) Label
CON
PC
Laptop CPU
Description
Connect a laptop or console terminal to
configure the router.
103