Compliance Statements For Nebs; Compliance Statements For Emc Requirements - Juniper MX10003 Hardware Manual

EN-61000-4-2 ESD
EN-61000-4-3 Radiated Immunity
EN-61000-4-4 EFT
EN-61000-4-5 Surge
EN-61000-4-6 Conducted Disturbances Immunity
EN-61000-4-11 Voltage Dips and Sags
The router is designed to comply with the following standards:
GR-63-Core: NEBS, Physical Protection
GR-1089-Core:EMC and Electrical Safety for Network Telecommunications Equipment
SR-3580 NEBS Criteria Levels (Level 3 Compliance)

Compliance Statements for NEBS

The equipment is suitable for installation as part of the Common Bonding Network (CBN).
The equipment is suitable for installation in locations where the National Electrical Code (NEC) applies.
The battery return connection is to be treated as an isolated DC return (that is, DC-I), as defined in
GR-1089-CORE.
You must provision a readily accessible device outside of the equipment to disconnect power. The device
must also be rated based on local electrical code practice.

Compliance Statements for EMC Requirements

IN THIS SECTION
Canada | 226
European Community | 226
Israel | 226
Japan | 226
United States | 227
225