Field Installed Upm Installation; Battery System Installation; Distributed Bypass Tie Cabinet Installation - Eaton Power Xpert 9395P-900 Series Installation And Operation Manual

High performance ups
Hide thumbs Also See for Power Xpert 9395P-900 Series:
Table of Contents

Advertisement

4.5

Field Installed UPM Installation

If installing a Plus 1 configuration with an FI-UPM, install the FI-UPM using the instructions in the Eaton
Xpert® 9395P UPS Field Installed UPM Mechanical Installation Manual (P-164000503) listed in paragraph 1.8.
After the FI-UPM is installed, proceed to paragraph 4.6 in this document if installing a battery system;
otherwise, proceed to paragraph 4.7 in this document to complete the wiring of the UPS.
4.6

Battery System Installation

If installing a battery system, install the customer-supplied battery system according to the battery and battery
system manufacturer's instructions and all applicable codes and regulations, including the NEC, Article 480.
After the battery system is installed, proceed to paragraph 4.7 if installing a distributed bypass tie cabinet;
otherwise, proceed to paragraph 4.8 to complete the wiring of the UPS.
4.7

Distributed Bypass Tie Cabinet Installation

NOTE
The tie cabinet must contain Module Output Breakers (MOBs) with dual auxiliary
contacts for control of the system. Without dual auxiliary MOBs, UPMs are not
allowed to go to bypass individually during servicing. All UPMs will go to bypass
instead of only the UPM needing service, decreasing critical load protection. With
dual auxiliary MOBs, one UPM can be bypassed while the remaining UPMs support
the load as long as the remaining UPMs have the capacity to do so.
If installing a distributed bypass system, install the customer-supplied tie cabinet or distribution panel according
to the tie cabinet or distribution panel manufacturer's instructions and all applicable codes and regulations,
including the NEC, Article 480. After the tie cabinet is installed, proceed to paragraph 4.8 to complete the wiring
of the UPS.
Eaton
®
®
Power Xpert
9395P-900 UPS Installation and Operation Manual P-164000501—Rev 09
UPS System Installation
www.eaton.com/powerquality
®
Power
4-17

Advertisement

Table of Contents
loading

Table of Contents