7.3.3
Using the Main Menu Buttons
The UPS menu bar shown in Figure 7-6 allows you to display data in the information area to help you monitor
and control UPS operation. Table 7-3 shows the basic menu structure.
Table 7-3. Display Function Menu Map
Menu Option
Description
HOME
Displays the system status both graphically and within the info bar.
METERS
Displays performance meters for the system or critical load.
CONTROLS
Allows access to various system performance control screens.
POWER MAPS
Allows operator to observe system power flow.
LOGS
Allows access to system information logs.
STATISTICS
Allows access to see system specific operation values.
Allows access to various screen controlled variables for system operation. Level 0, 1 and 2 are for user/operator.
SETTINGS
Level 3 is used only by service personnel.
Allows selection of
alternate language
Figure 7-6. Home Screen
NOTE
On all screens, Black lines indicate NO power flow, Green lines indicate ACTIVE
power flow, Yellow lines indicates an out-of-tolerance condition.
NOTE
Screens shown are representative examples of system operation. The screen data
will vary based on system activity at the time of observation.
®
®
Eaton
Power Xpert
9395P-900 UPS Installation and Operation Manual P-164000501—Rev 09
UPS Operating Instructions
www.eaton.com/powerquality
7-7