UPS Operating Instructions
7.3.5
Power Maps Screen (Bypass Mode)
Figure 7-11 shows the Bypass screen. The Bypass screen displays only when the system is in Bypass mode.
The Bypass screen shows a real-time graphical representation of the operating status.
Touching any of the buttons on the right side of the screen takes the user directly to that information screen.
Figure 7-11. Bypass Screen
7.3.6
Command Confirmation Pop-Up
Figure 7-12 is an example of a command request confirmation pop-up screen. This type of pop-up allows the
user to confirm that the requested command is valid.
Figure 7-12. Typical Command Confirmation Screen (Charger Off)
®
7-10
Eaton
Power Xpert
®
9395P-900 UPS Installation and Operation Manual P-164000501—Rev 09
Figure 7‐8
Figure 7‐9
Figure 7‐10
www.eaton.com/powerquality