Figure 5-2. Hot Sync Can Bridge Card Connections - Eaton Power Xpert 9395P-900 Series Installation And Operation Manual

Figure 5-2. Hot Sync CAN Bridge Card Connections

Table 5-1. Hot Sync CAN Bridge Card Interface Connections
J3 Terminal Name
1 Alarm
2 Alarm Return
3 Alarm Relay NC
4 Alarm Relay Com
5 Alarm Relay NO
6 TX
7 TX
8 CAN L
9 Can H
10 Shield
® ®
Eaton Power Xpert 9395P-900 UPS Installation and Operation Manual P-164000501—Rev 09
J3
Connections for Parallel System Control
Connections for RMP II, RIM II, or SCM II
Connections for Bypass Status
Alarm
Description
Programmable UPS alarm. Activated by a remote dry contact closure.
Alarm Relay NC Normally-closed contact opens when UPS is on bypass.
Bypass contact return.
Normally-open contact closes when UPS is on bypass.
RMP II, RIM II, and SCM II connections.
CAN input for parallel operation.
Installing Options and Accessories
www.eaton.com/powerquality 5-3