Figure 7-41. Repo Operation - Eaton Power Xpert 9395P-900 Series Installation And Operation Manual

Ne pas tenter de redémarrer le système après le déclenchement du circuit d'arrêt d'urgence à
distance avant d'avoir déterminé la raison du déclenchement.
2. To deactivate the REPO switch in preparation for restarting the UPS, insert the supplied key and rotate
clockwise until the red pushbutton releases (see Figure 7-41). To remove the key, rotate the key back to
the vertical position.
3. Restart the UPS by following the procedure in paragraph 7.4.1.
Power is present inside the UPS cabinet until the upstream input feeder circuit breaker is opened.
L 'intérieur de l'armoire de l'onduleur est alimenté jusqu'à ce que le disjoncteur du circuit
d'alimentation en amont soit activé.
Activated
Pushbutton locked into place

Figure 7-41. REPO Operation

Eaton
® ®
Power Xpert 9395P-900 UPS Installation and Operation Manual P-164000501—Rev 09
ATTENTION!
WARNING
AVERTISSEMENT!
Deactivated
Unlock pushbutton to release
www.eaton.com/powerquality
UPS Operating Instructions
7-29