The Following Table Shows The Panel Display Of 16-Bit And 32-Bit Value - Delta ASDA-A3 Series User Manual

Trial Operation and Panel Display

The following table shows the panel display of 16-bit and 32-bit value:

Example of the displayed value
4
The following table shows the panel display for the negative sign:
Example of the displayed value
Note:
1. Dec means the value is displayed in decimal format; Hex represents hexadecimal format.
2. The display is applicable in both Monitoring mode and Editing mode.
3. When all monitoring variables are 32 bits, you can switch the high / low bit and the display (Dec / Hex).
As described in Chapter 8, each parameter only supports one display method and cannot be switched.
4-10
(Dec)
16 bits
(Hex)
(Dec high)
(Dec low)
32 bits
(Hex high)
(Hex low)
If the value is -12345, it displays as 1.2.345 (only in decimal format;
there is no positive or negative sign for hexadecimal format display).
Description
If the value is 1234, it displays 01234 (in decimal format).
If the value is 0x1234, it displays 1234 (in hexadecimal
format; the first digit does not show).
If the value is 1234567890, the display of the high byte is
1234.5 and displays 67890 as the low byte (in decimal
format).
If the value is 0x12345678, the display of the high byte is
h1234 and displays L5678 as the low byte (in hexadecimal
format).
Description
ASDA-A3
Revision December, 2017