Installation
Safety precautions:
If the connection between the servo drive and servo motor is over 20 meters, please increase the
2
gauge of the UVW connecting wire and the encoder cable. Please refer to Section 3.1.6 for the
wire specification.
2.1 Ambient storage conditions
Before installation, this product must be kept in the shipping carton. In order to retain the
warranty coverage and for maintenance, please follow the instructions below for storage.
While the product is temporarily not in use:
Store the product in an ambient temperature range of -20°C to +65°C.
Store the product in a relative humidity range of 0% to 90% and a non-condensing
environment.
Avoid storing the product in an environment containing corrosive gas.
2-2
ASDA-A3
Revision December, 2017